Device enclosures
Printed appearance models and machined housings with access for connectors, displays and fasteners.
Industries
Custom enclosures, heat-management parts and assembly fixtures for electronics development and production support.
A mechanical prototype should reveal board clearances, cable interference and fastener access. AIHFABS combines printed fit-check models with machined metal parts so teams can review the enclosure before committing to a larger order. This service covers mechanical components, not PCB fabrication or assembly.
Provide the PCB outline, component keep-out zones, connector locations and fastening scheme. Separate cosmetic surfaces from thermal interfaces and identify features that will change during development.
Examples for quotation and engineering review.
Printed appearance models and machined housings with access for connectors, displays and fasteners.
Heat spreaders, mounting plates and drawing-defined cooling features for evaluation.
Spacers, standoffs and carrier plates positioned around the assembly stack.
Fixtures for holding a board or device during assembly and mechanical inspection.
Plan each stage around the part’s function, material and inspection requirements—from the first design review to a repeatable batch.
Send the model, revision, quantity and a drawing identifying critical dimensions and mating features.
Provide the PCB outline, component keep-out zones, connector locations and fastening scheme. Separate cosmetic surfaces from thermal interfaces and identify features that will change during development.
Mark PCB datums, connector clearances and enclosure interfaces; include finish references and acceptance criteria for visible surfaces.
Agree the sample checks and record drawing changes before ordering a repeat batch.
Match the process, material and finish to the part’s geometry and operating conditions. Share your requirements so the quotation can include the necessary secondary operations.
Produce aluminum enclosures, heat spreaders and mounting plates with controlled mating faces.
打开该工艺
Check enclosure appearance and assembly space before committing to production tooling.
打开该工艺Review housings, cable guides and assembly fixtures where nylon meets the operating requirements.
打开该工艺选择材料牌号和制造工艺前,请先查看具体应用要求。
适用于散热器及外壳;阳极氧化前需明确导热接触面的平面度及遮蔽区域。
适用于均热板及导电零件;需验证导电率、接口表面状态及氧化控制。
适用于外壳原型;普通 ABS 本身不能证明具有静电防护能力或特定阻燃等级。
黄铜零件需先确认合金牌号与毛坯形态,再评审车削结构、外观面及电镀。
CNC 使用 PC 聚碳酸酯毛坯,应明确视窗面、防护结构及装配载荷,不是类 PC 的 PU 树脂。
FR4 需明确层压板牌号、厚度、孔特征及电气或环境要求的证明文件。
外壳、面板及结构原型 类 ABS、类 PC 是 PU 树脂体系,并非注塑 ABS 或 PC。应比较实际需要的性能,不能统一按某个百分比认定等效。
透明件及抗冲击评估原型 类 ABS、类 PC 是 PU 树脂体系,并非注塑 ABS 或 PC。应比较实际需要的性能,不能统一按某个百分比认定等效。
具有明确阻燃文件要求的电子外壳原型 类 ABS、类 PC 是 PU 树脂体系,并非注塑 ABS 或 PC。应比较实际需要的性能,不能统一按某个百分比认定等效。
透明或着色的外观与装配模型 类 ABS、类 PC 是 PU 树脂体系,并非注塑 ABS 或 PC。应比较实际需要的性能,不能统一按某个百分比认定等效。
Supply the board outline, component heights and connector keep-out zones. Printed models can expose cable interference and assembly problems before machined housings are ordered; identify cosmetic faces and accessible fastener paths.
Provide the heat-source locations, contact areas and mounting scheme. Define flatness, surface finish and coating exclusions at thermal interfaces; cooling performance depends on the complete system and needs separate evaluation.
Board carriers and assembly fixtures need repeatable locating points without damaging components. Identify ESD requirements, probe or tool access and replaceable contact features. Do not assume an ordinary polymer print is ESD-safe.
These pages cover mechanical parts for electronics. PCB design, fabrication and assembly are not included in this offering.
Yes. Provide the board and connector geometry and identify clearances. A fit-check model does not establish electrical or thermal compliance.
No. ESD performance depends on the specific grade and process. State the required properties and ask for a material review before ordering.
Upload the drawing and project requirements. Material suitability, pricing and delivery are confirmed during quotation.
我们使用 cookie 优化体验。继续使用即表示您同意我们的 隐私政策
接受