Typical tolerance
±0.005 mm standard; down to ±0.0025 mm when specified
CNC機械加工
Precision turning for small-diameter, slender, complex, ultra-high-precision parts — from Swiss watchmaking roots to medical, aerospace, and connectors.
Swiss CNC Machining Services is a precision turning technology designed for small-diameter, slender, highly complex, and ultra-high-precision parts. Originating in 19th-century Swiss watchmaking, it is now a core process for medical devices, aerospace, electronic connectors, and other high-end industries.
Swiss-type turning feeds bar through a guide bushing so the cut happens next to a support. That is why slender pins, bone screws, and connector contacts stay straight at L/D ratios that would chatter on a conventional lathe.
Live tools, sub-spindles, and bar feeders finish turning, milling, drilling, and back-working in one cycle. AIHFABS quotes Swiss when the part is small, long, and high-precision — especially in batches.
Diameter and L/D below are where Swiss earns the setup. Short, fat parts usually stay on a lathe.
±0.005 mm standard; down to ±0.0025 mm when specified
0.5–32 mm (some machines to 38 mm)
Advantage clearest above 3:1
Ra 0.2–0.8 μm typical as-machined
Most cost-effective in medium-to-large batches
From 3–7 business days; faster on repeat batches
Stainless, titanium, brass, alloy steel, and small-diameter engineering plastics.
As-turned Swiss surfaces are already fine. Passivation or light polish is the usual extra.
Ra 0.2–0.8 μm is typical straight off the guide bushing — often enough for medical and connector pins.
Stainless parts cleaned and passivated after the bar run, before bagging.
Local polish on sealing diameters or visible watch-grade faces.
Swiss wins on slender, small-diameter work. Short chucked parts are cheaper on standard turning.
| プロセス | 納期 | 公差 | 料金 |
|---|---|---|---|
| CNC Machining ServicesMetals & plastics | From 1–5 business days depending on complexity and finish | ±0.05 mm standard; tighter on request with drawing callouts | Instant quote · typical prototype from $45 |
| CNC Milling ServicesMetals & plastics | Simple 1–3 days; complex 3–7 days; batch 5–15 days | ±0.01 mm standard; ±0.005 mm high precision | Instant quote · typical prototype from $40 |
| CNC Turning ServicesMetals & plastics | Simple 1–3 days; complex 7–10 days | ±0.01 mm standard; ±0.001–0.002 mm high precision | Instant quote · typical prototype from $35 |
| CNC Routing ServicesPlastics & composites | From 2–4 business days | Medium precision (~±0.025 mm class) | Instant quote · typical panel job from $30 |
| 5-Axis CNC MachiningMetals & plastics | From 3–7 business days depending on complexity | ±0.02–0.05 mm on critical features when specified | Instant quote · typical prototype from $80 |
| Precision Machining ServicesMetals & plastics | From 3–8 business days (complexity dependent) | ±0.005–0.01 mm; Ra 0.4–1.6 μm; CPK ≥ 1.33 | Instant quote · quoted to drawing / inspection grade |
| Large Part CNC MachiningMetals & plastics | Quoted per project (fixturing and logistics driven) | Around ±0.025 mm on critical features; large spans project-dependent | Project quote · fixturing and logistics driven |
| Swiss CNC MachiningMetals & plastics | From 3–7 business days; faster on repeat batches | ±0.005 mm standard; down to ±0.0025 mm when specified | Instant quote · most economical in batch runs |
Bar stock feeds through a guide bushing that supports the cut point.
The sliding headstock advances the bar while tools turn, mill, drill, and tap.
A sub-spindle finishes back-end features without manual re-clamping.
Automatic bar feeding supports medium-to-high volume unattended runs.
Bar diameter, bushing, and live-tool list are set from the solid. First-article diameters are locked before the bar feeder runs unattended.
Optical or CMM checks cover the features you mark. Batch work is where the rate drops.
Keep the part in the bushing’s comfort zone.
| Feature | Recommended practice |
|---|---|
| L/D ratio | Swiss shines above about 3:1. Short stubby parts can stay on a lathe. |
| Walls | Keep walls at least 0.5–0.8 mm unless we agree a micro-machining plan. |
| Holes | Prefer standard drill and tap sizes to cut tool changes. |
| Tolerances | Relax anything that does not locate or seal; it drops programming time. |
CNC machining removes material from solid stock with computer-controlled mills, lathes, and multi-axis centers.
プロセス詳細を見る
CNC Milling Services use computer numerical control (CNC) mills to cut workpieces with rotating tools according to programmed toolpaths.
プロセス詳細を見る
CNC Turning Services use computer numerical control lathes to remove material while the workpiece rotates at high speed and the cutting tool feeds along a set path.
プロセス詳細を見るAbout 0.5–32 mm on most cells, some machines to 38 mm. Larger diameters belong on standard turning.
±0.005 mm is a common planning value. ±0.0025 mm is quoted when specified and inspected.
No. Connectors, aerospace nozzles, watch parts, and any slender pin use the same cells.
Guide-bushing setup and live-tool CAM are front-loaded. Bar-fed runs amortize that cost.
Yes — live tools and a sub-spindle cover flats, cross-holes, and back-working in one cycle.
Use these process-specific checks when preparing your model, drawing and quote request. The confirmed quotation and approved drawing define the requirements for your part.
Swiss machining is suited to repeated small turned parts, particularly slender features that benefit from support close to the cut. Stock diameter, material straightness and the relation between major and minor diameters influence the manufacturing plan.
Cross-holes, miniature threads and narrow grooves need a defined tooling and deburring strategy. Identify functional edges, clean internal passages and surfaces that contact a mating component. Small dimensions require an inspection method appropriate to the feature.
Confirm material grade, thread details, burr limits, lot quantity and the dimensions needed for first-article approval. Regulated applications need their own documentation and validation requirements agreed before manufacture.
AIHFABSはCADアップロードからカスタム3DプリントとCNCの見積を出します。SLA、SLS、MJF、SLM、FDM、DLP、フライス、旋削を比較し、同じ注文でベイパースムージング、染色、陽極酸化、研磨、粉体塗装を追加できます。
インスタント見積は試作、治具、ハウジング、小ロット向けです。材料、プロセス、数量、納期が揃って表示されます。
材料、プロセス、数量、納期が揃って表示され、仕様変更が新たな問い合わせにならないようにします。
STL、STEPなど一般的なCADをアップロードしてオンライン見積。
同じ部品で3Dプリント技術とCNCを比較。
ポリマーまたは金属を選び、必要なら3D Plusハードウェア仕上げを追加。
決済前に価格と納期を確認。特殊仕様は手動見積。
このページのプロセス、業界、サンプルを再現したい場合は、アップロードから技術と仕上げを図面に合わせてください。
当サイトでは Cookie を使用して体験をパーソナライズしています。本サイトを利用することで、以下に同意したものとみなされます： プライバシーポリシー
同意する
