本文へスキップ
AIHFABS Announces Major Updates to Solutions and Materials Pages and Introduces B2B Project See More +

真空注型材料:PU樹脂系

シリコーンは型の材料です。複製部品は通常ポリウレタン(PU)樹脂で、配合によって一部のエンジニアリングプラスチックやエラストマーの特性に近づけます。

Choose a casting material family

Rigid & semi-rigid PU resins

Start here for housings, panels, clear covers and assembly prototypes. Compare ABS-like, PC-like, PP-like and specialist PU formulations by the behavior your prototype must demonstrate.

Explore PU / ABS-like / PC-like →

Rubber-like & elastomer resins

Start here for grips, flexible boots, cushioning and seal evaluation. Define hardness, deformation and recovery together with tear, compression and exposure requirements.

Explore rubber-like / elastomer →

真空注型材料:PU樹脂系

シリコーンは型の材料です。複製部品は通常ポリウレタン(PU)樹脂で、配合によって一部のエンジニアリングプラスチックやエラストマーの特性に近づけます。

以下は検討対象の樹脂系で、全配合の供給を保証するものではありません。発注前に実際のデータシートとサンプル要件を確認してください。

材料・グレード代表的な用途見積もり前の確認事項
ABS-like →筐体、パネル、構造試作品強度、剛性、衝撃、劣化を実際の対象グレードと比較。
PC-like →透明部品と耐衝撃評価用の試作品サンプルで透明度、色、表面、劣化を確認。
PMMA (Acrylic)-like →窓、照明カバー、導光部の外観モデルサンプルで透明度、色、表面、劣化を確認。
PP-like →クリップ、ヒンジ、柔軟な試作品Shoreスケール、目標硬度、繰り返し曲げの要件を指定。
POM-like →歯車と摩耗接触部の評価強度、剛性、衝撃、劣化を実際の対象グレードと比較。
PA-like / filled PU →荷重を受ける構造試作品。充填材系を確認強度、剛性、衝撃、劣化を実際の対象グレードと比較。
Rubber-like (Elastomer) →評価用のシール、グリップ、緩衝部品Shoreスケール、目標硬度、繰り返し曲げの要件を指定。
Heat-resistant PU →グレード確認後の熱曝露試作品データシート、使用温度、曝露時間を確認。
Flame-retardant PU →難燃要件の証拠を必要とする電子筐体試作品グレードと厚さに対応するUL 94書類を依頼。
Transparent PU →透明・着色の外観および組立モデルサンプルで透明度、色、表面、劣化を確認。

見積もり前の確認事項

最高使用温度は何度ですか?

連続温度、ピーク温度、曝露時間、炉内処理やリフロー条件をお知らせください。HDTは試験結果であり、連続使用温度の保証ではありません。

近い特性でも同じ材料ではありません

ABSライクやPCライクはPU系で、射出成形ABSやPCではありません。必要な特性ごとに比較してください。一律の同等性の割合はありません。

硬度はグレードごとに異なります

選定樹脂のデータシートに記載されたShore AまたはShore D硬度と試験方法を使います。硬度だけでは耐熱性、疲労寿命、耐薬品性は判断できません。

難燃グレードには根拠が必要です

UL 94 V-0の表記は、正確な樹脂、試験片厚さ、試験または認定書類に対応している必要があります。材料系の名称だけでは等級は決まりません。

軟質部品は真空注型だけのものではありません

ゴムライクPUは柔軟な試作品やシールの評価に使えます。柔軟な3Dプリントや他の成形方法もあり、機能と検証要件に応じて選定します。

Select by the job your prototype must do

Choose the test first, then shortlist a resin. A cosmetic model, a loaded enclosure and a compressed seal need different evidence even when their CAD geometry is similar.

Prototype requirementFamilies to reviewEvaluate on the finished part
Enclosures & assembly fitABS-like or rigid PUBosses, screw engagement, mating clearances, stiffness and impact at the intended use temperature.
Clear windows & visual coversTransparent, PC-like or PMMA-like PUHaze, tint, viewing thickness, visible-face polish and appearance after the intended exposure. A clear sample does not establish optical-grade performance.
Clips & repeated flexPP-like or a compliant PU formulationDeflection, recovery and cracking over the required assembly cycles. Review the clip geometry and test the actual mating part.
Grips, boots & cushioningRubber-like elastomer PUShore scale and hardness, tear around thin sections, grip texture, deformation and recovery under load.
Seals & fluid contactElastomer formulation selected for the mediumCompression, leakage, swelling and recovery after exposure to the actual fluid and temperature. Hardness alone cannot establish sealing suitability.
Heat or flame requirementsDocumented specialist PU gradeExact grade, specimen thickness and relevant test conditions. Agree on required reports before ordering.

Appearance, geometry & finishing

Color & surface texture

Identify show faces, target color and gloss level. Supply a physical reference or color standard where appearance matters. Agree whether color is cast into the resin or applied as paint, and review a sample under the intended lighting.

Clear parts

Mark the viewing area and specify what must be visible through it. Master quality, mold surface, part thickness and finishing influence clarity. Discuss bubbles, tint and acceptable visual defects before production.

Walls, undercuts & parting lines

Flag thin walls, deep pockets and fragile projections for mold review. Identify where a parting line or gate witness is acceptable. Silicone tooling can accommodate some undercuts, but demolding still needs to protect both the part and the mold.

Inserts & mating features

Provide the insert specification, location and assembly loads. Identify threads, sealing faces and datum features on a drawing. Review whether a feature should be cast, drilled or finished afterward, including how it will be inspected.

From material shortlist to approved parts

  1. Define the use case

    Send CAD, quantity and a drawing with critical dimensions. Describe loading, temperature, fluids, outdoor exposure and whether the part is for appearance, assembly or functional testing.

  2. Agree on a resin & manufacturing plan

    Review the exact resin designation and data sheet alongside master preparation, mold layout, finish and any inserts. Confirm the proposed delivered condition and material availability in the quotation.

  3. Evaluate the first sample

    Check dimensions, color, surface and assembly. Run representative functional checks on the chosen formulation; compare results against agreed acceptance criteria before releasing the remaining quantity.

  4. Confirm repeat-order requirements

    Record the approved resin, finish and sample reference. Discuss tooling condition and repeat quantity when reordering; mold life and dimensional consistency depend on geometry, resin and handling.

Material selection questions

Is the cast part made of silicone?

The mold is silicone. The parts described here are cast PU resin systems. If your finished component must be silicone, specify that material requirement so a suitable process can be reviewed separately.

Can ABS-like PU replace production ABS?

Use it to evaluate the properties relevant to your prototype. ABS-like describes a performance target rather than identical chemistry. Compare the selected resin with the intended production grade and validate the functions you need.

Can I specify a hardness without selecting a resin?

Provide the target Shore scale and value, but also describe load, deformation, recovery, temperature and contact media. Two formulations with similar hardness can differ in tear resistance, compression behavior and aging.

What dimensional tolerance should I put on my drawing?

Mark critical dimensions, datums and inspection conditions for review. Geometry, master accuracy, resin shrinkage and flexible-part support affect the result. Agree on feature-specific acceptance criteria rather than assuming one tolerance applies to every surface.

What documentation should I request?

Request the exact resin designation and technical data sheet. Specify any material traceability, test report or compliance evidence needed for your application before quotation. A supplier family page or an unrelated printing-material data sheet is not evidence for the delivered casting resin.

Cookie ポリシー

当サイトでは Cookie を使用して体験をパーソナライズしています。本サイトを利用することで、以下に同意したものとみなされます: プライバシーポリシー

同意する