Impellers and rotors
Bladed geometry in SLM metal, balanced enough for a bench test after machining.
Industries
We specialize in custom parts for the energy industry, whether single pieces or complex multiple pieces. 3D printing can create complex parts for the energy industry, such as internal channels, manifolds, and optimized structures, enhancing efficiency and sustainability in various energy applications. With our comprehensive 3D printing solutions and post-processing services, we deliver precise, high-performance parts that meet the specific needs of the energy industry.
Energy teams send rotating hardware, flow parts, and fixtures that sit near heat. SLM metal is the usual path. SLS nylon covers the shop fixtures that should not wait on a mill.
Impellers, pump housings, and manifolds with internal channels show up first. They are development or replacement parts, not a certified pressure vessel from this page. We print, finish, and machine the faces you call out.
Polymer fixtures for assembly and inspection ride along on the same account. They keep the metal printer free for the part that has to be metal.
Flow and heat first. Fixtures second.
Bladed geometry in SLM metal, balanced enough for a bench test after machining.
Internal channels that replace a stack of welds. Metal when pressure or heat requires it.
Stainless or aluminum mounts that sit near hot equipment.
Nylon nests that hold a casting or a print for a gauge.
Plan each stage around the part’s function, material and inspection requirements—from the first design review to a repeatable batch.
Air, water, oil, or heat. That decides metal versus nylon and which alloy.
SLM for metal. SLS only when the duty is a fixture or a cool cover.
Call out the faces and threads. We finish them on the same order.
Dimensional check before the part leaves. Certification stays with your QA pack.
Match the process, material and finish to the part’s geometry and operating conditions. Share your requirements so the quotation can include the necessary secondary operations.
Our 3D Plus™ hardware solution offers comprehensive and accessible post-processing services. We offer more than 20 post-processing options for as-printed parts. For post-processing of 3D printed aerospace parts, we have electroplating, powder coating, spray painting, threading, sandblasting, vibratory smoothing, vapor smoothing, and more!
Discover 3D Plus™ Hardware SolutionOur dedicated 3D Plus™ software solution is designed to streamline the 3D printing and post-processing ordering process. It simplifies your workflow by allowing you to select materials, choose post-processing options, receive instant price calculations, and collaborate with your team, all in one user-friendly platform.
Discover 3D Plus™ Software Solution材料のグレードや製造工法を選ぶ前に、用途ごとの要件をご確認ください。
冷却部品や筐体向けです。異種金属接触腐食への適合性と電気絶縁を確認してください。
導電・伝熱部品向けです。接触形状、めっき、温度上昇の判定基準を指定してください。
腐食環境の金属部品向けです。実際の流体、温度、環境に応じてグレードを選定してください。
Inconel 718は合金状態、形状、検査計画を指定する特殊加工の相談として扱います。
評価用のシール、グリップ、緩衝部品 ABSライクやPCライクはPU系で、射出成形ABSやPCではありません。必要な特性ごとに比較してください。一律の同等性の割合はありません。
グレード確認後の熱曝露試作品 ABSライクやPCライクはPU系で、射出成形ABSやPCではありません。必要な特性ごとに比較してください。一律の同等性の割合はありません。
Heat exchangers, manifolds and housings require a defined fluid path and inspection access. Specify temperature, pressure, material compatibility and surfaces that need machining; internal channels also need a cleaning and verification plan.
Brackets, adapter plates and maintenance tools should be reviewed against their loads and working environment. Identify corrosion exposure, clamping points and wear interfaces, and distinguish prototype aids from safety-critical operating equipment.
Request alloy identification, dimensional reports and any pressure or leak tests with the enquiry. Test scope and acceptance criteria must be agreed for the particular component; manufacturing a shape does not establish system performance.
We print and inspect to your drawing. Pressure and PED/ASME claims stay with your engineer of record.
Yes, in SLM stainless, then machine hubs and faces. Say the balance requirement on the quote.
Send a scan and photos. We will say whether it can print as a mesh or needs a rebuild.
Upload the impeller or manifold and state the medium and temperature. We will price SLM and CNC together.
当サイトでは Cookie を使用して体験をパーソナライズしています。本サイトを利用することで、以下に同意したものとみなされます: プライバシーポリシー
同意する