CNC機械加工
CNC Machining Services
CNC machining removes material from solid stock with computer-controlled mills, lathes, and multi-axis centers.
見積もりを作成目次
Challenge
A precision engineering firm specializing in aerospace components required a batch of high-strength, lightweight structural brackets for a next-generation drone platform. The design demanded exceptional dimensional accuracy, superior impact resistance, and a sleek matte-black aesthetic finish. Traditional CNC machining from aluminum alloys was cost-prohibitive for the initial prototype run of 30 units, while conventional 3D printing resins lacked the mechanical toughness and surface quality needed for functional testing. The team needed a material solution that combined near-production-grade strength with the design freedom and speed of additive manufacturing.
Solution
The engineering team adopted the Special Black Resin N9 Process—a proprietary high-performance resin formulation optimized for advanced stereolithography (SLA) printing—to manufacture the structural brackets shown in the image. The N9 resin delivers an exceptionally deep, uniform black coloration with a fine textured surface finish, while exhibiting outstanding flexural strength (≥85 MPa) and impact resistance that far exceeds standard engineering resins. By leveraging this material, the team produced parts with tight tolerances (±0.05 mm) and smooth surface roughness (Ra ≤ 3 μm) directly from CAD data. The distinctive finned geometry—visible in the eight parallel ribs on the component surface—was designed to maximize stiffness-to-weight ratio while providing enhanced heat dissipation pathways. This approach eliminated the need for expensive tooling and allowed rapid design iteration across three prototype iterations within a single sprint cycle.
Results
• Exceptional Mechanical Performance:The N9 resin components achieved a flexural strength of 89 MPa and an impact resistance 3.2× higher than standard gray engineering resins, successfully passing rigorous drop-test and load-cycle validation without cracking or permanent deformation under the drone's operational stress profile.
• Rapid Prototyping & Design Iteration:Reduced the prototype-to-test cycle from 8 weeks (traditional machining) to just 4 days, enabling the team to validate and refine three distinct fin-geometry variations within a single development month and optimize the stiffness-to-weight ratio by 18%.
• Cost-Efficient Low-Volume Production:Eliminated the need for $25,000+ in CNC fixture and tooling investment for the pilot run, delivering 30 fully functional, dimensionally verified brackets at less than 15% of the traditional manufacturing cost, with the matte-black N9 finish requiring no post-processing painting or coating.
