後処理は社内で。別業者は不要
造形ままの部品には層跡、サポート痕、素材色が残ります。外注の塗装や陽極酸化は二度目の見積と待ち、色ずれの原因になります。
3D Plus™ ハードウェアは現場カタログです。金属・樹脂向け20工程を造形と同じ伝票・同じ価格で処理します。
- 展示とブランド色向けの外観仕上げ
- 最終使用部品の耐摩耗・防食層
- ねじと組立前準備で治具にそのまま入る
色、表面、機能から始める
グループへジャンプし、工程ページで材料、制限、用途を確認します。
色
染色、塗装、陽極酸化、めっき、コーティング、光学仕上げ。
スプレー塗装
Spray painting in 3Dプリント is used to enhance the aesthetic and qualities of 3Dプリント part. It applies a fine mist of paint using a spray gun or aerosol can. Spray painting provides a uniform and smooth finish and a wide range of color options based on Pantone color. Spray painting helps hide layer lines and minor imperfections efficiently and add protective layers.
詳しく見る >
陽極酸化
Anodizing in 3Dプリント is an electrochemical process that enhances the surface properties of metal parts, particularly aluminum. Anodized aluminum has improved wear resistance and electrical insulation and can add vibrant colors through dyes. Types of anodizing include standard anodizing, which offers a colorful and protective layer, and hard anodizing(, also known as Type III anodizing), which produces a thicker, more robust oxide layer.
詳しく見る >
コーティング
Coating in 3Dプリント applies a protective or decorative layer to the surface of a printed object to enhance its performance and appearance. Coating improves the durability and aesthetics of 3Dプリント parts by increasing surface smoothness, adding color, and providing additional protection against environmental factors such as moisture, UV radiation, and abrasion. We offer Gray Primer Coating for SLA printed resin parts.
詳しく見る >
染色
Dyeing in 3Dプリント is used to add color to printed parts, particularly nylon 3Dプリントs. The process of dyeing involves immersing the printed object in a dye solution, allowing the color to penetrate the 材料 for an even, vibrant 表面仕上げ. Dyeing enhances the visual appeal of parts and maintains the 材料's original properties without adding significant weight or altering its structure.
詳しく見る >
電着塗装
Electrocoating or e-coating applies a uniform, protective coating to conductive parts through an electrochemical process. By immersing 3Dプリント metal parts in a bath containing a water-based coating 材料, where positively charged particles adhere to negatively charged parts, e-coating can provide excellent corrosion resistance, enhance surface hardness, and provide a smooth, uniform coating that protects parts from environmental damage and extends their life span.
詳しく見る >
メッキ
Electroplating involves depositing a thin layer of metal onto the surface of a 3Dプリント part through an electrochemical process. Electroplating enhances the 表面仕上げ of the as-printed parts, improving durability, conductivity, corrosion protection and aesthetics. It can coat complex geometries uniformly and is compatible with a wide range of base 材料, with the potential to use different plated metals such as gold, silver, nickel, copper and brass.
詳しく見る >
フロスト加工
Frosting in 3Dプリント refers to a 後処理 method used to achieve a fine, matte 表面仕上げ on transparent resin parts. The frosting process involves lightly sanding the surface of a printed part(, usually with sandpaper or similar abrasive 材料), to diffuse light and reduce transparency, creating a frosted appearance. It can conceal minor surface imperfections, enhance visual 品質, and improve the tactile feel of parts, making them less slippery and easier to handle.
詳しく見る >
半透明
Translucency refers to a 後処理 method that converts a clear resin 3Dプリント into a semi-transparent one, which diffuses light and reduces clarity, resulting in a frosted appearance. Translucency typically involves techniques such as sanding, chemical treatments, or applying a matte coating to the surface of the printed part. Translucency enhances aesthetics with a frosted look, masks imperfections, and improves visual 品質 for specific design aesthetics or functional needs.
詳しく見る >
透明
Transparency in 3Dプリント refers to a 後処理 method designed to make clear resin 3Dプリントs shiny and glossy, thereby enhancing their visual clarity and appeal. Transparency treatments typically involve sanding and applying a clear coat to smooth the surface and reduce light scattering. It produces a highly reflective, glass-like surface that highlights the intricate details of the 3Dプリントs. Transparency is ideal for applications where optical clarity is required.
詳しく見る >表面
ブラスト、研磨、蒸気平滑、タンブリング、粉体塗装で層跡を抑え手触りを揃えます。
ビードブラスト
Bead blasting in 3Dプリント is a 表面仕上げing technique that involves propelling small, abrasive beads at high velocity onto the surface of a printed metal part to clean, smooth or texturize it. Bead blasting can reach intricate details and hard-to-reach areas, providing a consistent finish that enhances the aesthetics of the part and improves the surface adhesion of subsequent coatings or treatments.
詳しく見る >
研磨
Polishing in 3Dプリント aims to enhance the 表面仕上げ of the printed part, giving it a smooth and shiny appearance. (The polishing process involves various methods such as sanding, chemical treatment and mechanical polishing to remove layer lines and imperfections.)Polishing can significantly improve the aesthetics of a part and enhance its durability, making it suitable for display or end-use applications. There are several types of polish, including mirror polish, which creates a highly reflective surface.
詳しく見る >
粉体塗装
Powder coating involves applying a dry powder to the surface of as-printed parts to create a durable, high-品質 finish. Powder coating uses an electrostatic method to adhere the powder to the part, which is then cured under heat or ultraviolet light to form a smooth, uniform coating. It provides a thicker, more resilient surface than traditional liquid paints and comes in a wide variety of colors and textures. (Powder coating offers excellent durability and resistance to chipping, scratching and fading, and it releases very few volatile organic compounds (VOCs), making it an environmentally friendly choice.)
詳しく見る >
サンドブラスト
サンドブラスト, also known as abrasive blasting, is a 後処理 technique that enhances the 表面仕上げ of printed parts by directing a stream of abrasive 材料 at the surface under high pressure. サンドブラスト effectively smooths out surface irregularities, removes support 材料 residue, and provides an even, refined surface. It is a fast and efficient process that ensures surface consistency throughout the part.
詳しく見る >
スクリーン印刷
Screen printing is a 後処理 technique that involves transferring ink onto the surface of a 3Dプリント part through a mesh screen to create detailed and vivid designs. Screen printing is particularly effective for adding intricate patterns, logos or text to parts, enhancing their aesthetics and functionality. It offers excellent color vibrancy and durability, can be applied to a wide range of 材料, and produces consistent, high-品質 prints quickly.
詳しく見る >
スムースサンディング
レジン造形向けのスムースサンディングは、段階的に細かいサンドペーパーを使用して完璧な研磨面を実現します。粗い目で乾式サンディングから始め、主要な欠陥やレイヤーラインを除去し、続いてより細かい目でウェットサンディングを行い、滑らかで光沢のある仕上げを得ます。視覚・触覚品質を向上させ、欠陥を除去し、外観を改善し、後続処理の準備をします。
詳しく見る >
タンブル
Tumbling is used to enhance the 表面仕上げ of metal parts by placing them in a barrel or vibratory tumbler filled with abrasive media. Tumbling smooths and polishes parts by rubbing them against each other and the media, effectively removing surface imperfections and achieving a consistent finish. It improves the durability and appearance of metal parts, prepares them for further processing, and ensures a consistent finish from batch to batch.
詳しく見る >
蒸気平滑化
Vapor smoothing in 3Dプリント is a 後処理 method used specifically for 3Dプリント nylon parts to achieve a smooth, glossy 表面仕上げ. The process exposes the printed part to chemical vapors that melt the surface 材料, causing it to flow and fill in rough areas, resulting in a more uniform and smoother 表面仕上げ. Vapor smoothing reduces surface roughness, enhancing the visual and tactile qualities of the component and creating a water-repellent, hydrophobic surface.
詳しく見る >
バイブ平滑化
Vibratory smoothing is used to enhance the 表面仕上げ of 3Dプリント plastic parts by placing them in a vibratory tumbler filled with abrasive media. It involves the parts and media being agitated together, which creates friction that smooths and polishes the surface, effectively removing layer lines and minor imperfections. Vibratory smoothing improves the aesthetic and functional qualities of the parts and enhances durability by reducing surface roughness.
詳しく見る >機能
タップとねじ加工で、造形品にねじ・インサート・治具を入れられます。
タップ加工
Tapping is used to create internal threads within printed parts, allowing for the integration of screws and other threaded fasteners. It uses a tap tool to cut precise threads into the 材料, ensuring a secure and reliable connection. Tapping creates strong, durable threads in a variety of 3Dプリント 材料, enhancing part functionality and structural integrity, and providing a cost-effective solution for custom threaded components.
詳しく見る >
ねじ切り
Threading is used to create internal or external threads on printed parts, allowing the integration of screws, bolts and other threaded fasteners. Threading can be achieved by various methods, such as tapping, heat-setting inserts, or directly printing the threads. It produces precise and durable threads that withstand repeated use, enhances the functionality and assembly of 3Dプリント parts, and improves the structural integrity of connections.
詳しく見る >fin_hub_services_title
fin_hub_services_lead
fin_hub_materials_title
fin_hub_materials_lead
後処理 FAQ
工程ページを開く前、またはファイルを上げる前の短い回答です。
20種の仕上げはどう選びますか？
用途から始めます。色と光学、表面、ねじ。グループを開き、工程ページで材料と制限を確認します。
造形と仕上げは同じ注文ですか？
はい。カタログの 3D Plus ハードウェアは造形と同じ見積です。価格と納期が一緒に更新され、別工場は不要です。
色、表面、タップを重ねられますか？
材料が許せば、同じ見積に複数追加できます。マスクする面や厳しめの嵌合を注記してください。
リストにない仕上げはどうしますか？
手見積で仕様を書いてください。特殊コーティング、検査、混在組立はエンジニアリングが見積します。
