Device enclosures
Printed appearance models and machined housings with access for connectors, displays and fasteners.
Industries
Custom enclosures, heat-management parts and assembly fixtures for electronics development and production support.
A mechanical prototype should reveal board clearances, cable interference and fastener access. AIHFABS combines printed fit-check models with machined metal parts so teams can review the enclosure before committing to a larger order. This service covers mechanical components, not PCB fabrication or assembly.
Provide the PCB outline, component keep-out zones, connector locations and fastening scheme. Separate cosmetic surfaces from thermal interfaces and identify features that will change during development.
Examples for quotation and engineering review.
Printed appearance models and machined housings with access for connectors, displays and fasteners.
Heat spreaders, mounting plates and drawing-defined cooling features for evaluation.
Spacers, standoffs and carrier plates positioned around the assembly stack.
Fixtures for holding a board or device during assembly and mechanical inspection.
Plan each stage around the part’s function, material and inspection requirements—from the first design review to a repeatable batch.
Send the model, revision, quantity and a drawing identifying critical dimensions and mating features.
Provide the PCB outline, component keep-out zones, connector locations and fastening scheme. Separate cosmetic surfaces from thermal interfaces and identify features that will change during development.
Mark PCB datums, connector clearances and enclosure interfaces; include finish references and acceptance criteria for visible surfaces.
Agree the sample checks and record drawing changes before ordering a repeat batch.
Match the process, material and finish to the part’s geometry and operating conditions. Share your requirements so the quotation can include the necessary secondary operations.
Produce aluminum enclosures, heat spreaders and mounting plates with controlled mating faces.
このプロセスを開く
Check enclosure appearance and assembly space before committing to production tooling.
このプロセスを開くReview housings, cable guides and assembly fixtures where nylon meets the operating requirements.
このプロセスを開く材料のグレードや製造工法を選ぶ前に、用途ごとの要件をご確認ください。
ヒートシンクや筐体向けです。陽極酸化処理前に熱接触面の平面度とマスキング範囲を指定してください。
ヒートスプレッダーや導電部品向けです。導電率、接触面の仕上げ、酸化対策を検証してください。
筐体の試作品向けです。一般的なABSだけではESD対策や特定の難燃等級は保証されません。
黄銅では、合金グレードと素材形状を確認してから旋削形状、外観面、めっきを検討します。
切削用PC素材では視認面、保護形状、組立荷重を指定します。ポリカーボネートはPCライクPUではありません。
FR4は積層板グレード、厚さ、穴形状、必要な電気・環境特性の証拠を指定します。
筐体、パネル、構造試作品 ABSライクやPCライクはPU系で、射出成形ABSやPCではありません。必要な特性ごとに比較してください。一律の同等性の割合はありません。
透明部品と耐衝撃評価用の試作品 ABSライクやPCライクはPU系で、射出成形ABSやPCではありません。必要な特性ごとに比較してください。一律の同等性の割合はありません。
難燃要件の証拠を必要とする電子筐体試作品 ABSライクやPCライクはPU系で、射出成形ABSやPCではありません。必要な特性ごとに比較してください。一律の同等性の割合はありません。
透明・着色の外観および組立モデル ABSライクやPCライクはPU系で、射出成形ABSやPCではありません。必要な特性ごとに比較してください。一律の同等性の割合はありません。
Supply the board outline, component heights and connector keep-out zones. Printed models can expose cable interference and assembly problems before machined housings are ordered; identify cosmetic faces and accessible fastener paths.
Provide the heat-source locations, contact areas and mounting scheme. Define flatness, surface finish and coating exclusions at thermal interfaces; cooling performance depends on the complete system and needs separate evaluation.
Board carriers and assembly fixtures need repeatable locating points without damaging components. Identify ESD requirements, probe or tool access and replaceable contact features. Do not assume an ordinary polymer print is ESD-safe.
These pages cover mechanical parts for electronics. PCB design, fabrication and assembly are not included in this offering.
Yes. Provide the board and connector geometry and identify clearances. A fit-check model does not establish electrical or thermal compliance.
No. ESD performance depends on the specific grade and process. State the required properties and ask for a material review before ordering.
Upload the drawing and project requirements. Material suitability, pricing and delivery are confirmed during quotation.
当サイトでは Cookie を使用して体験をパーソナライズしています。本サイトを利用することで、以下に同意したものとみなされます: プライバシーポリシー
同意する