Rigid & semi-rigid PU resins
Start here for housings, panels, clear covers and assembly prototypes. Compare ABS-like, PC-like, PP-like and specialist PU formulations by the behavior your prototype must demonstrate.
Explore PU / ABS-like / PC-like →Start here for housings, panels, clear covers and assembly prototypes. Compare ABS-like, PC-like, PP-like and specialist PU formulations by the behavior your prototype must demonstrate.
Explore PU / ABS-like / PC-like →Start here for grips, flexible boots, cushioning and seal evaluation. Define hardness, deformation and recovery together with tear, compression and exposure requirements.
Explore rubber-like / elastomer →矽膠用於製作模具,複製出的零件通常為聚氨酯(PU)樹脂,透過配方模擬部分工程塑膠或彈性體性能。
以下為可討論的樹脂類別,不代表每種配方均可供應。訂購前應確認具體產品資料表與樣品要求。
| 材料 / 牌號 | 典型用途 | 報價前確認 |
|---|---|---|
| ABS-like → | 外殼、面板與結構原型 | 與實際目標牌號比較強度、剛性、衝擊與老化性能。 |
| PC-like → | 透明件與抗衝擊評估原型 | 透過樣品確認透明度、顏色、表面效果與老化。 |
| PMMA (Acrylic)-like → | 視窗、燈罩與外觀導光模型 | 透過樣品確認透明度、顏色、表面效果與老化。 |
| PP-like → | 卡扣、鉸鏈與柔性原型 | 確認 Shore 標尺、目標硬度與反覆彎曲要求。 |
| POM-like → | 齒輪與磨耗介面評估 | 與實際目標牌號比較強度、剛性、衝擊與老化性能。 |
| PA-like / filled PU → | 承載結構原型,需確認填充樹脂成分 | 與實際目標牌號比較強度、剛性、衝擊與老化性能。 |
| Rubber-like (Elastomer) → | 用於評估的密封件、握把與緩衝原型 | 確認 Shore 標尺、目標硬度與反覆彎曲要求。 |
| Heat-resistant PU → | 經牌號審查的受熱原型 | 確認資料表、使用溫度與暴露時間。 |
| Flame-retardant PU → | 具明確阻燃文件要求的電子外殼原型 | 索取對應牌號與厚度的 UL 94 文件。 |
| Transparent PU → | 透明或著色的外觀與組裝模型 | 透過樣品確認透明度、顏色、表面效果與老化。 |
請說明持續溫度、峰值溫度、暴露時間,以及烘烤或迴焊工況。HDT 是測試結果,不等於可承諾的長期使用溫度。
類 ABS、類 PC 是 PU 樹脂系統,並非射出成型 ABS 或 PC。應比較實際所需性能,不能統一按某個百分比認定等效。
應採用所選樹脂資料表的 Shore A 或 Shore D 硬度與測試方法。硬度本身不能證明耐溫、疲勞壽命或耐化學性。
UL 94 V-0 的描述必須對應具體樹脂、試片厚度及測試或認證文件,不能僅憑材料類別名稱判定。
橡膠類 PU 可用於柔性原型與密封件評估。柔性 3D 列印與其他成型方式也可製作軟質零件,應依功能與驗證要求選擇工法。
Choose the test first, then shortlist a resin. A cosmetic model, a loaded enclosure and a compressed seal need different evidence even when their CAD geometry is similar.
| Prototype requirement | Families to review | Evaluate on the finished part |
|---|---|---|
| Enclosures & assembly fit | ABS-like or rigid PU | Bosses, screw engagement, mating clearances, stiffness and impact at the intended use temperature. |
| Clear windows & visual covers | Transparent, PC-like or PMMA-like PU | Haze, tint, viewing thickness, visible-face polish and appearance after the intended exposure. A clear sample does not establish optical-grade performance. |
| Clips & repeated flex | PP-like or a compliant PU formulation | Deflection, recovery and cracking over the required assembly cycles. Review the clip geometry and test the actual mating part. |
| Grips, boots & cushioning | Rubber-like elastomer PU | Shore scale and hardness, tear around thin sections, grip texture, deformation and recovery under load. |
| Seals & fluid contact | Elastomer formulation selected for the medium | Compression, leakage, swelling and recovery after exposure to the actual fluid and temperature. Hardness alone cannot establish sealing suitability. |
| Heat or flame requirements | Documented specialist PU grade | Exact grade, specimen thickness and relevant test conditions. Agree on required reports before ordering. |
Identify show faces, target color and gloss level. Supply a physical reference or color standard where appearance matters. Agree whether color is cast into the resin or applied as paint, and review a sample under the intended lighting.
Mark the viewing area and specify what must be visible through it. Master quality, mold surface, part thickness and finishing influence clarity. Discuss bubbles, tint and acceptable visual defects before production.
Flag thin walls, deep pockets and fragile projections for mold review. Identify where a parting line or gate witness is acceptable. Silicone tooling can accommodate some undercuts, but demolding still needs to protect both the part and the mold.
Provide the insert specification, location and assembly loads. Identify threads, sealing faces and datum features on a drawing. Review whether a feature should be cast, drilled or finished afterward, including how it will be inspected.
Send CAD, quantity and a drawing with critical dimensions. Describe loading, temperature, fluids, outdoor exposure and whether the part is for appearance, assembly or functional testing.
Review the exact resin designation and data sheet alongside master preparation, mold layout, finish and any inserts. Confirm the proposed delivered condition and material availability in the quotation.
Check dimensions, color, surface and assembly. Run representative functional checks on the chosen formulation; compare results against agreed acceptance criteria before releasing the remaining quantity.
Record the approved resin, finish and sample reference. Discuss tooling condition and repeat quantity when reordering; mold life and dimensional consistency depend on geometry, resin and handling.
The mold is silicone. The parts described here are cast PU resin systems. If your finished component must be silicone, specify that material requirement so a suitable process can be reviewed separately.
Use it to evaluate the properties relevant to your prototype. ABS-like describes a performance target rather than identical chemistry. Compare the selected resin with the intended production grade and validate the functions you need.
Provide the target Shore scale and value, but also describe load, deformation, recovery, temperature and contact media. Two formulations with similar hardness can differ in tear resistance, compression behavior and aging.
Mark critical dimensions, datums and inspection conditions for review. Geometry, master accuracy, resin shrinkage and flexible-part support affect the result. Agree on feature-specific acceptance criteria rather than assuming one tolerance applies to every surface.
Request the exact resin designation and technical data sheet. Specify any material traceability, test report or compliance evidence needed for your application before quotation. A supplier family page or an unrelated printing-material data sheet is not evidence for the delivered casting resin.
選擇材料牌號與製造製程前,請先確認實際應用需求。
適用於支架及連接部件,具有較高比強度;用於飛行零件前,需審查疲勞、成形方向、熱處理與材料可追溯性。
適用於器械五金與夾具;選材時應考量腐蝕、滅菌循環與鈍化要求。
適用於輕量化外殼與研發支架;需評估振動、熱膨脹與螺紋連接的耐久性。
適用於夾爪與線纜導向件;需評估潛變、濕度影響與反覆彎曲。
適用於導熱與導電介面;需審查防氧化措施與接觸電阻。
適用於外殼原型;一般 ABS 本身不能證明具有靜電防護能力或特定阻燃等級。
適用於導電與導熱零件;需明確訂定接觸結構、鍍層與溫升驗收標準。
適用於絕緣夾具部件;需針對實際製程驗證釋氣、化學相容性與微粒產生情況。
適用於外觀原型與外殼;製模前需確認紋理、顏色與組裝效果。
我們使用 Cookie 優化瀏覽體驗。繼續使用即代表您同意我們的 隱私權政策
同意