Device enclosures
Printed appearance models and machined housings with access for connectors, displays and fasteners.
Industries
Custom enclosures, heat-management parts and assembly fixtures for electronics development and production support.
A mechanical prototype should reveal board clearances, cable interference and fastener access. AIHFABS combines printed fit-check models with machined metal parts so teams can review the enclosure before committing to a larger order. This service covers mechanical components, not PCB fabrication or assembly.
Provide the PCB outline, component keep-out zones, connector locations and fastening scheme. Separate cosmetic surfaces from thermal interfaces and identify features that will change during development.
Examples for quotation and engineering review.
Printed appearance models and machined housings with access for connectors, displays and fasteners.
Heat spreaders, mounting plates and drawing-defined cooling features for evaluation.
Spacers, standoffs and carrier plates positioned around the assembly stack.
Fixtures for holding a board or device during assembly and mechanical inspection.
Plan each stage around the part’s function, material and inspection requirements—from the first design review to a repeatable batch.
Send the model, revision, quantity and a drawing identifying critical dimensions and mating features.
Provide the PCB outline, component keep-out zones, connector locations and fastening scheme. Separate cosmetic surfaces from thermal interfaces and identify features that will change during development.
Mark PCB datums, connector clearances and enclosure interfaces; include finish references and acceptance criteria for visible surfaces.
Agree the sample checks and record drawing changes before ordering a repeat batch.
Match the process, material and finish to the part’s geometry and operating conditions. Share your requirements so the quotation can include the necessary secondary operations.
Produce aluminum enclosures, heat spreaders and mounting plates with controlled mating faces.
打開該製程
Check enclosure appearance and assembly space before committing to production tooling.
打開該製程Review housings, cable guides and assembly fixtures where nylon meets the operating requirements.
打開該製程選擇材料牌號與製造製程前,請先確認實際應用需求。
適用於散熱器與外殼;陽極氧化前需明確訂定導熱接觸面的平面度與遮蔽範圍。
適用於均熱板與導電零件;需驗證導電率、介面表面狀態與氧化控制。
適用於外殼原型;一般 ABS 本身不能證明具有靜電防護能力或特定阻燃等級。
黃銅零件需先確認合金牌號與毛坯形態,再審查車削結構、外觀面與電鍍。
CNC 使用 PC 聚碳酸酯毛坯,應確認視窗面、防護結構與組裝負載,並非類 PC 的 PU 樹脂。
FR4 需確認層壓板牌號、厚度、孔特徵與電氣或環境要求的證明文件。
外殼、面板與結構原型 類 ABS、類 PC 是 PU 樹脂系統,並非射出成型 ABS 或 PC。應比較實際所需性能,不能統一按某個百分比認定等效。
透明件與抗衝擊評估原型 類 ABS、類 PC 是 PU 樹脂系統,並非射出成型 ABS 或 PC。應比較實際所需性能,不能統一按某個百分比認定等效。
具明確阻燃文件要求的電子外殼原型 類 ABS、類 PC 是 PU 樹脂系統,並非射出成型 ABS 或 PC。應比較實際所需性能,不能統一按某個百分比認定等效。
透明或著色的外觀與組裝模型 類 ABS、類 PC 是 PU 樹脂系統,並非射出成型 ABS 或 PC。應比較實際所需性能,不能統一按某個百分比認定等效。
Supply the board outline, component heights and connector keep-out zones. Printed models can expose cable interference and assembly problems before machined housings are ordered; identify cosmetic faces and accessible fastener paths.
Provide the heat-source locations, contact areas and mounting scheme. Define flatness, surface finish and coating exclusions at thermal interfaces; cooling performance depends on the complete system and needs separate evaluation.
Board carriers and assembly fixtures need repeatable locating points without damaging components. Identify ESD requirements, probe or tool access and replaceable contact features. Do not assume an ordinary polymer print is ESD-safe.
These pages cover mechanical parts for electronics. PCB design, fabrication and assembly are not included in this offering.
Yes. Provide the board and connector geometry and identify clearances. A fit-check model does not establish electrical or thermal compliance.
No. ESD performance depends on the specific grade and process. State the required properties and ask for a material review before ordering.
Upload the drawing and project requirements. Material suitability, pricing and delivery are confirmed during quotation.
我們使用 Cookie 優化瀏覽體驗。繼續使用即代表您同意我們的 隱私權政策
同意