Skip to content
AIHFABS Announces Major Updates to Solutions and Materials Pages and Introduces B2B Project See More +

服務

3D列印服務

樹脂、尼龍與金屬積層製造線上報價,涵蓋首件原型到小批量生產。

AIHFABS在同一工廠提供SLA、DLP、LCD、SLS、MJF、FDM與金屬SLM。先在本頁選定製程,再進入子頁查看材料、設計規範與典型公差。

  • Rapid prototyping
  • Production 3D printed parts
  • Instant 3D printing quote
services lp 3d printing hero alt

How 3D printing works

A digital model is sliced into layers. Each layer is cured, fused, or extruded, then the next layer is added until the part is complete.

  1. Read the file

    上傳STEP、STL或3MF。系統讀取壁厚、體積與支撐風險。

  2. Match a process

    在同一報價裡比較製程與材料——樹脂、尼龍或金屬。

  3. Set finish and qty

    下單前選擇後處理(打磨、染色、氣相拋光、機加)與數量。

  4. Print and ship

    我們列印、檢測並出貨,交期寫在報價行上。

What is 3D printing

3D printing 鈥?additive manufacturing 鈥?builds a physical part from a CAD or mesh file by placing thin layers of photopolymer, thermoplastic, or metal powder. The printer only adds material where the model needs it, so lattices, internal channels, and one-off shapes do not require dedicated tooling.

On AIHFABS the same upload can price resin, nylon, and metal processes. You choose the process for cosmetics, strength, or heat, then add dye, vapor smoothing, or machining on the quote instead of sending a second RFQ.

services_lp_3d_printing_custom_title

services_lp_3d_printing_custom_lead

services_lp_3d_printing_custom_body

Main 3D printing technologies

Four processes cover most buyer searches: FDM, SLS, SLA, and MJF. Metal SLM, DLP, and LCD sit in the capabilities list below.

What this 3D printing service is good at 鈥?and where it is not

Use the plus column to decide if additive is the right first path. Use the limits column to know when CNC or molding will win later.

Strengths

  • Geometry without fixtures Internal ducts, lattices, and consolidated assemblies that would need many CNC setups.
  • Same-week prototypes Most plastic jobs leave the shop in hours to a few days after the file is approved.
  • Print only the lot you need Keep the model in a library and reprint when the revision changes 鈥?no obsolete stock.
  • Light, application-specific materials Resins for detail, nylons for clips and ducts, TPU for flex, metals when heat or load demands it.
  • One step from file to part No soft tooling for 1鈥?00 pieces. Design edits stay in the CAD, not in a mold shop.
  • Less subtractive scrap Material goes into the part and supports, not a leftover billet. Powder beds recycle unused powder.

Limits

  • Not every stock is printable Only resins, selected nylons, TPU, and a short metal list. Food-contact and some alloys need another process.
  • Build envelope A part larger than the chamber is split and joined. That adds time and a bond line.
  • Finishing is usually required Supports, powder cake, and layer texture need clean-up before a cosmetic or sealing face is ready.
  • Unit cost stays flatter Unlike injection molding, printing does not drop sharply at thousands of pieces.
  • Layered structure FDM in particular is anisotropic. Load paths should follow the layers or move to SLS, MJF, or CNC.
  • Tolerance is process-specific Typical plastic holds about 卤0.2鈥?.3 mm. Critical bores still want machining after print.

services_lp_3d_printing_proto_title

services_lp_3d_printing_proto_h3

services_lp_3d_printing_proto_body

services_lp_3d_printing_prod_title

services_lp_3d_printing_prod_body

3D printing capabilities

Open a process for materials, envelopes, and design rules. Then upload CAD for a dated 3D printing quote.

6 個製程
選擇性雷射熔融 (SLM)

選擇性雷射熔融 (SLM) Metal

Selective Laser Melting (SLM) is a powder-bed metal additive process. A high-power laser scans each cross-section of your CAD model, melting metal powder that solidifies into a dense part.

交期
From 5 business days (express options where available)
公差
±0.1–0.3 mm, tighter after machining
收費
Instant quote · typical metal part from $90

材料: Aluminum Alloy AlSi10Mg Aluminum Alloy 6061 Stainless Steel 316L Stainless Steel 17-4PH 18Ni300 Maraging Steel Inconel 718 Titanium Alloy Ti₆Al₄V Copper Alloy

SLS 3D Printing Services

選擇性雷射燒結 (SLS) Plastic powder

AIHFABS SLS 3D printing services fuse engineering-grade SLS plastics into durable, self-supporting parts.

交期
From 48 hours express; 72 hours / 5 days standard tiers
公差
±0.3 mm or ±0.3%
收費
Instant quote · typical nylon part from $28

材料: Nylon PA 12 White Nylon PA 12 Black Nylon PA 12 Glass-filled White Nylon PA 11 White Nylon PA 11 Black Nylon PA 6 Glass-filled Black TPU White Polypropylene Glass-filled

熔絲堆疊成型 (FDM)

熔絲堆疊成型 (FDM) Thermoplastic filament

Fused Deposition Modeling (FDM) extrudes heated thermoplastic filament in thin beads, stacking layers to form a part.

交期
From 24–48 hours depending on size
公差
±0.5 mm or ±0.5% on FDM-appropriate geometry
收費
Instant quote · typical prototype from $12

材料: PLA PETG ABS

Typical lead time and tolerance

Values below are shop-typical. Drawing callouts and inspection on the quote override this table.

製程 交期 公差 收費 材料
選擇性雷射熔融 (SLM)Metal From 5 business days (express options where available) ±0.1–0.3 mm, tighter after machining Instant quote · typical metal part from $90 Aluminum Alloy AlSi10Mg, Aluminum Alloy 6061, Stainless Steel 316L, Stainless Steel 17-4PH, 18Ni300 Maraging Steel, Inconel 718, Titanium Alloy Ti₆Al₄V, Copper Alloy
光固化成型 (SLA)Resin Quoted with your CAD upload Instant quote · typical resin part from $18 Standard Resin White, Standard Resin Black, High-Detail Resin Gray, High-Detail Resin White, Tough Resin White, Ultra Tough Resin Yellow, Ultra Tough Resin Blue, High-Temp Resistant Resin Red, Premium Clear Resin
數位光處理 (DLP)Resin From 48 hours ±0.2 mm on supported geometry Instant quote · typical resin batch from $20 Standard Resin White, Standard Resin Black, High-Detail Resin Gray, High-Detail Resin White, Tough Resin White, Ultra Tough Resin Yellow, Ultra Tough Resin Blue, High-Temp Resistant Resin Red, Premium Clear Resin
選擇性雷射燒結 (SLS)Plastic powder From 48 hours express; 72 hours / 5 days standard tiers ±0.3 mm or ±0.3% Instant quote · typical nylon part from $28 Nylon PA 12 White, Nylon PA 12 Black, Nylon PA 12 Glass-filled White, Nylon PA 11 White, Nylon PA 11 Black, Nylon PA 6 Glass-filled Black, TPU White, Polypropylene Glass-filled
多噴射熔融 (MJF)Plastic powder From 48 hours express; standard 72 hours / 5 days ±0.3 mm or ±0.3% Instant quote · typical PA12 part from $25 Nylon PA 12 Gray, TPU Gray
熔絲堆疊成型 (FDM)Thermoplastic filament From 24–48 hours depending on size ±0.5 mm or ±0.5% on FDM-appropriate geometry Instant quote · typical prototype from $12 PLA, PETG, ABS

起步價適用於結構簡單的原型件。最終價格與出貨日以CAD報價為準。

services_lp_3d_printing_quality_title

services_lp_3d_printing_quality_body

services_lp_3d_printing_parts_title

services_lp_3d_printing_parts_lead

services lp 3d printing parts 1 alt
services_lp_3d_printing_parts_1_cap
services lp 3d printing parts 2 alt
services_lp_3d_printing_parts_2_cap
services lp 3d printing parts 3 alt
services_lp_3d_printing_parts_3_cap
services lp 3d printing parts 4 alt
services_lp_3d_printing_parts_4_cap

全球創客的信賴之選

來自工程師、設計師和愛好者的真實評價。

檔案隱私對我們很重要。AIHFABS 嚴格保密 CAD 檔案。

Alex L. · 創業者

3D列印常見問題

應該選哪種3D列印製程?

依用途選:SLA/DLP/LCD適合光滑外觀件;SLS/MJF適合耐用尼龍件;FDM適合低成本治具;SLM適合金屬。各子頁列出材料與限制。

線上3D列印精度如何?

塑膠件一般約±0.2–0.3 mm;金屬SLM機加後更緊。精確能力見各製程頁,並以報價確認為準。

可以3D列印和CNC混用嗎?

可以。很多訂單先列印近淨形,再機加關鍵面。從本頁開始,需要減材時再進入SLM或CNC落地頁。

需要什麼檔案?

金屬與後續機加優先STEP;塑膠件STL或3MF即可。一次上傳可為所選製程報價。

services_lp_3d_printing_faq_5_q

services_lp_3d_printing_faq_5_a

Engineering guide to custom 3D printed parts

Industrial 3D printing builds a part layer by layer, but the choice of resin, powder or filament changes its mechanical behavior, surface and post-processing route. Select for the application rather than the technology name. Use the process comparison below to narrow the route, then review the linked process guide for the part geometry.

Process selection: application, material and design constraints
Process and materialsUseful applicationsEngineering tradeoff
SLA / DLP · photopolymer resinsDetailed visual models, masters and fit-check partsSupport contact and post-curing affect the finished part. Check heat, UV exposure and long-term load requirements for the selected resin.
SLS · nylon and supported flexible gradesClips, ducts, housings and functional prototypesPowder supports the build, but cavities still need cleaning access. Surface texture and thin features affect sealing and assembly.
MJF · supported nylon gradesFunctional polymer parts and repeated small batchesPacking and orientation influence build planning. Confirm grade, color, finish and critical interfaces rather than assuming all nylon parts behave alike.
FDM · thermoplastic filamentConcept models, fixtures and larger practical prototypesLayer direction and toolpath affect strength. Support-facing surfaces may differ from the top and side walls.
SLM · metal powder alloysComplex metal brackets, passages and consolidated assembliesResidual stress, support removal and finishing need planning. Precision bores or sealing faces may need secondary machining.

Design for orientation, supports and cleaning

Show the load direction, cosmetic face and mating interfaces before the build orientation is finalized. Avoid trapped powder or resin inside closed cavities. Provide accessible drains and cleaning paths for hollow parts, allow for support removal and identify thin features that need special review. A minimum wall value is meaningful only with its material, unsupported span and orientation.

Choose materials by service conditions

Check stiffness, impact behavior, sustained temperature, moisture exposure and the environment in which the part will be used. PA12, PA11, TPU, engineering resins and metal alloys solve different problems. Use the exact grade datasheet; a familiar trade name or an ABS-like label is not proof of equivalence to another manufacturing material.

Separate build accuracy from assembly fit

Whole-part dimensional accuracy, local feature resolution and a working clearance are different specifications. Holes, mating pins and thin walls can respond differently to orientation and finishing. Mark critical dimensions on a drawing and state the mating component or required fit. Confirm the accepted tolerance and measurement condition in the quote.

Plan post-processing before printing

Cleaning, curing or depowdering is part of the manufacturing route. Dyeing, painting, polishing, smoothing and metal machining add different effects to appearance and dimensions. Specify color, texture, visible surfaces, masking and fit-critical features. Coatings and smoothing can change a clearance; metal finishing may require machining stock.

Inspection and production release

Agree the material grade, file revision, orientation-sensitive requirements and finished-part dimensions before production. For a first run, use a sample to evaluate fit, surface and handling. Ask which dimensional or material documentation can be supplied for the order. Safety-critical or regulated applications require their own application validation and agreed acceptance plan.

取得3D列印即時報價

上傳一次CAD,即可比較SLA、SLS、MJF、FDM與SLM的材料與交期。

services_lp_3d_printing_quote_btn
Cookie 政策

我們使用 Cookie 優化瀏覽體驗。繼續使用即代表您同意我們的 隱私權政策

同意