Standard Resin
Example partsAppearance validation, display models, and concept prototypes.
Selection focusMatte white for form and surface review
Example partsProduct housings and display models.
Selection focusOpaque black for appearance checks
3D Printing
Ultra-smooth resin parts with fine feature resolution — show models, master patterns, and clear prototypes.
Stereolithography (SLA) cures liquid photopolymer with a precision UV laser, building parts layer by layer. SLA excels when surface quality, small features, and dimensional accuracy matter more than rugged thermoplastic performance. Plan around ±0.2 mm on well-supported features. Standard resin lead-time options are 24, 48, or 72 hours after file approval, subject to part size and finishing. Check your live quote after uploading CAD for available options.
From CAD review to finished resin parts: six stages of our SLA manufacturing workflow.
Review wall thickness, fine features, mating fits and cosmetic faces against the intended use. Select the resin for stiffness, toughness, heat exposure or clarity. Confirm critical dimensions and finishing requirements; hollow parts need accessible drain and cleaning paths.
Balance visible surfaces, dimensional stability and build height when orienting the part. Place supports under overhangs and isolated features, keeping contacts away from critical faces where practical. Slice the supported model using the layer thickness and exposure settings appropriate to the resin and machine.
Check resin condition and prepare the vat and build platform for the selected material. A UV laser traces each cross-section, selectively curing the liquid resin and bonding it to the previous layer. Resin is recoated between layers, and the build sequence repeats until the part is complete.
Drain excess resin and wash the printed parts with a resin-compatible cleaning solution. Flush accessible internal passages and cavities to remove uncured resin, then allow the parts to dry fully. Cleaning access and trapped-resin risks are reviewed before hollow parts are approved for production.
Apply the resin-specific post-cure schedule, with controlled light exposure and temperature where required. Sequence support removal around curing to limit distortion, then dress contact marks. Sanding, polishing, clear coating or painting follows the agreed finish; transparent resin alone does not guarantee optical clarity.
Check finished parts against the drawing and agreed acceptance criteria after curing and finishing. Focus on critical dimensions, mating features, surface condition and any specified appearance requirements. Confirm the required inspection scope before production, then protect delicate features and pack accepted parts for shipment.
| Parameter | Capability |
|---|---|
| Max. build envelope | 1,400 × 700 × 500 mm (X × Y × Z) |
| Dimensional tolerance | Typical SLA: ±0.2 mm on well-supported features. Standard Resin White catalog reference: ±0.2% |
| Minimum wall thickness | 1.0 mm recommended for repeatable results |
| Minimum feature size | 0.5 mm diameter for pins under 7 mm tall (design guideline) |
| Minimum hole diameter | 0.75 mm for through-holes up to 12 mm deep (design guideline) |
| Layer height | 0.05–0.25 mm (G1400-P+ equipment reference) |
| Surface finish | Spray Painting, Coating, Dyeing, Electroplating, Frosting, Screen Printing, Smooth Sanding, Tapping, Threading |
| Supports | Light, removable support structures stabilize overhangs and isolated features during laser curing. Small contact points make supports easy to remove during post-processing. |
| Lead time | Standard resin lead-time options are 24, 48, or 72 hours after file approval, subject to part size and finishing. Pricing varies by turnaround, and longer lead times may cost less. |
Explore resin families, then review the specific catalog variant for your project.
Example partsAppearance validation, display models, and concept prototypes.
Selection focusMatte white for form and surface review
Example partsProduct housings and display models.
Selection focusOpaque black for appearance checks
Example partsMiniature gears, precision structures, and jewelry prototypes.
Selection focusGray finish for fine-detail inspection
Example partsMiniature gears, precision structures, and jewelry prototypes.
Selection focusFine details with an opaque white finish
Example partsSmooth prototypes, sporting goods mockups, and snap-fit parts.
Selection focusToughness for handling and snap-fits
Example partsPrototypes for microfluidics, soft robotics, wearable electronics, and medical devices.
Selection focusFlexibility and tear resistance
Example partsHeat-resistant test fixtures, biomedical scaffolds, and parts for high-temperature aerospace and automotive electronics applications.
Selection focusHeat resistance after post-curing
Example partsTransparent housings, decorative pieces, and architectural models.
Selection focusOptical clarity and surface finish
Tell us the material and application requirements for your part.
Variants are grouped for browsing. Check each material’s data sheet for properties and processing requirements.
Compare common SLA finishes in these AI-generated examples.
Wash away uncured resin and let parts dry fully.
Cure parts using the settings required for the resin.
Remove supports and smooth accessible contact marks.
Sand visible surfaces while preserving fine details and critical dimensions.
Polish accessible clear surfaces and add a clear coat if specified.
Prime and paint to the requested color and sheen.
Coatings add thickness. Flag critical fits on your drawing.
SLA is the laser-resin option. DLP exposes a full layer at once; SLS/MJF skip supports on nylon.
| 製程 | 交期 | 公差 | 收費 |
|---|---|---|---|
| 選擇性雷射熔融 (SLM)Metal | From 5 business days (express options where available) | ±0.1–0.3 mm, tighter after machining | Instant quote · typical metal part from $90 |
| 光固化成型 (SLA)Resin | Quoted with your CAD upload | Instant quote · typical resin part from $18 | |
| 數位光處理 (DLP)Resin | From 48 hours | ±0.2 mm on supported geometry | Instant quote · typical resin batch from $20 |
| 選擇性雷射燒結 (SLS)Plastic powder | From 48 hours express; 72 hours / 5 days standard tiers | ±0.3 mm or ±0.3% | Instant quote · typical nylon part from $28 |
| 多噴射熔融 (MJF)Plastic powder | From 48 hours express; standard 72 hours / 5 days | ±0.3 mm or ±0.3% | Instant quote · typical PA12 part from $25 |
| 熔絲堆疊成型 (FDM)Thermoplastic filament | From 24–48 hours depending on size | ±0.5 mm or ±0.5% on FDM-appropriate geometry | Instant quote · typical prototype from $12 |
A look at our large-format SLA equipment and resin production workshop.
Equipment & Manufacturing
Print large resin prototypes, appearance models and master patterns.
Usable part size depends on resin, orientation and support layout.
Industrial SLA Equipment · Build Volume (X × Y × Z)
1,400 × 700 × 500 mm
Manufacturer specifications ↗RSPro800 X · 800 × 800 × 550 mm
Manufacturer reference specifications ↗
Have a resin part ready for manufacturing review?
Upload Your DrawingsSee SLA-printed resin housings, detailed prototypes and decorative models.
Have an SLA part ready for manufacturing review?
Upload Your DrawingsApplications Across Industries
SLA produces fine-detail resin parts with smooth surfaces for design review, assembly fit checks and master patterns.
Explore All IndustriesResin and finish are selected for each project based on appearance, fit and handling requirements.
Cabin mockups and assembly fit checks
ExploreInterior trim prototypes and light covers
ExploreDevice enclosure prototypes and anatomical models
ExploreSensor housing and gripper prototypes
ExploreEnclosure prototypes and light pipes
ExploreAppearance models and packaging prototypes
ExploreSee how resin, part design and finishing affect your SLA quote.
Confirm finishing requirements for your heat test.
Prices use one solid rectangular sample at each listed size, before optional finishing and shipping. Upload your CAD file for a quote based on actual part volume.
The quote depends on the CAD model, resin grade, order quantity and requested finish. Share any inspection or shipping requirements when requesting a quote.
Resin grade · Part volume · Build orientation · Supports
Ask whether noncritical sections can be hollowed with drain holes. Keep support contacts off visible faces.
Layer thickness · Surface finish · Clear-part polishing
Mark the faces that need polishing, painting or a tighter fit. Use the standard finish elsewhere.
Order quantity · Build layout · Turnaround
Request quotes at the quantities and lead times you can accept. Group parts with the same resin and finish.
From 3D files to a quote: choose materials, configure your parts and compare prices in one online workflow.
Explore the quoting steps
When surface quality, small text, or a show-model finish matters more than impact toughness or raw cost.
Yes, on clear and translucent resins. A clear coat is usually needed for a lens-like look.
About ±0.2 mm on well-supported features. Large spans and thin unsupported walls wander more.
Yes. We place them on non-cosmetic faces when you mark the show side.
Standard resin lead-time options are 24, 48, or 72 hours after file approval, subject to part size and finishing.
Use these process-specific checks when preparing your model, drawing and quote request. The confirmed quotation and approved drawing define the requirements for your part.
Specify visual, fit-check or functional use. Standard, tough, clear and heat-resistant resins are distinct grades. For sustained loads, sunlight or elevated temperature, review the selected resin data and test the application rather than treating a detailed resin model as a production thermoplastic.
Mark the presentation face and mating surfaces. Support contacts may need sanding; polishing a clear part affects both appearance and dimensions. Hollow geometry needs drainage and access for cleaning and curing. Define which holes or fits need a secondary operation.
Confirm resin grade, color or transparency target, support-mark locations and whether dimensions are checked after curing and finishing. Use a sample when optical appearance or a sensitive fit determines acceptance.
AIHFABS 根據 CAD 上傳為定制 3D 列印與 CNC 加工報價。比較 SLA、SLS、MJF、SLM、FDM、DLP、銑削與車削,並可在同一訂單中添加蒸汽拋光、染色、陽極氧化、拋光或粉末塗裝。
即時報價適合原型、治具、殼體與小批量。材料、工藝、數量與交期一起展示。
材料、工藝、數量與交期一起展示,減少工程變更後再發一輪供應商郵件。
上傳 STL、STEP 等常用 CAD 格式即可線上報價。
在同一零件上比較 3D 列印工藝與 CNC 選項。
選擇聚合物或金屬,需要時再添加 3D Plus 硬體後處理。
結算前查看價格與交期,特殊規格可申請人工報價。
若本頁描述的是你想再現的工藝、產業或樣品,請從上傳流程開始,把工藝與後處理與圖紙對齊。
選擇材料牌號與製造製程前,請先確認實際應用需求。
適用於支架及連接部件,具有較高比強度;用於飛行零件前,需審查疲勞、成形方向、熱處理與材料可追溯性。
適用於器械五金與夾具;選材時應考量腐蝕、滅菌循環與鈍化要求。
適用於輕量化外殼與研發支架;需評估振動、熱膨脹與螺紋連接的耐久性。
適用於夾爪與線纜導向件;需評估潛變、濕度影響與反覆彎曲。
適用於導熱與導電介面;需審查防氧化措施與接觸電阻。
適用於外殼原型;一般 ABS 本身不能證明具有靜電防護能力或特定阻燃等級。
適用於導電與導熱零件;需明確訂定接觸結構、鍍層與溫升驗收標準。
適用於絕緣夾具部件;需針對實際製程驗證釋氣、化學相容性與微粒產生情況。
適用於外觀原型與外殼;製模前需確認紋理、顏色與組裝效果。
我們使用 Cookie 優化瀏覽體驗。繼續使用即代表您同意我們的 隱私權政策
同意