Red Hexagonal Lattice Vase

Design details: Red Hexagonal Lattice Vase

The vase combines a smooth slender neck with a rounded body covered in repeating hexagonal openings and circular motifs. The contrast between the solid neck and open lattice makes transitions, narrow bridges and the lower rim especially important visual features.

For a similar design, review wall thickness at lattice intersections and the accessibility of the inner shell. Orientation and support locations should protect the decorative front and allow uncured resin to drain from recesses before washing and post-curing.

Features to review on a similar design

• Inspect narrow bridges where circular motifs meet
• Keep lattice openings clear during polishing
• Use a liner if the finished vase is intended to hold water

SLA resin design review

SLA builds photopolymer resin parts with fine surface detail. For a similar model, select the resin by its intended use: an appearance model, a fit-check enclosure and a part exposed to heat need different material properties. Review support contact, drainage from hollow regions, washing access and post-curing before committing to a build. Standard resin should not be assumed to provide long-term outdoor durability or load-bearing performance.

Polishing considerations

Polishing should be localized around the features that need a smoother appearance. Thin ribs, small openings and sharp decorative edges can lose definition if too much material is removed. For enclosed or lattice geometry, agree which surfaces can be reached and use a visual reference to define the finish.