CNC機械加工
CNC Machining Services
CNC machining removes material from solid stock with computer-controlled mills, lathes, and multi-axis centers.
見積もりを作成目次
Success Story: Lightweight Metal Exhaust Manifolds for Small-Batch Performance Production
Challenge
A high-performance automotive engineering firm required a small-batch production run of exhaust manifolds for a limited-edition track vehicle. The design demanded significant weight reduction to improve vehicle dynamics, but traditional casting was economically unviable for low volumes. Additionally, the complex internal geometry needed for thermal management could not be achieved through conventional manufacturing without expensive assembly and welding.
Solution
The team adopted Direct Metal Laser Sintering (DMLS) to manufacture the manifolds in 316L Stainless Steel, specifically targeting lightweight design and small-batch agility. By leveraging metal additive manufacturing, they consolidated the assembly into a single printed part with topology-optimized walls, achieving a 22% weight reduction compared to the cast iron baseline. This approach eliminated hard tooling costs, allowing for cost-effective production of 50 units with identical, high-precision quality.
Results
• Lightweight Performance: Achieved a 22% mass reduction through topology optimization and wall-thinning, directly enhancing power-to-weight ratio.
• Small-Batch Viability: Delivered 50 production-ready units in under two weeks without $15,000+ tooling investment.
• Design Consolidation: Replaced a 4-part welded assembly with a single seamless component, eliminating leak paths and reducing assembly labor by 90%.
